因素空间理论下基点分类算法研究

目前，基于因素空间理论的背景基提取算法计算过程复杂，初始化必须依赖各因素极值，基点数量提取冗余等原因，未能在应用中取得很好效果。为此，结合内点判别法和知识可继承、可扩展的思想，提出一种计算简单、初始化独立、基点数量小的改进的背景基提取算法。然后，利用改进的背景基提取算法构造出一种全新的数据分类算法-基点分类算法，基点分类算法以提取每一类样本的背景基为预测模型，再通过新定义的λ-背景基，优化预测模型。数值实验表明:基点分类算法原理简单、构造难度小、分类模型泛化能力强，预测能力准确率高，同时严格的模型限定区域又能为识别新类别提供新方法。     

自动捕捉平衡系数试验电流工具设计

在电梯平衡系数传统测量方法中,存在电梯轿厢和对重平衡点难以判断、人为因素导致测量误差偏大、测量不准导致效率低等问题,为解决这些问题,设计出一款基于光电传感器和霍尔传感器的电流自动捕捉工具,除能够高效准确识别电梯轿厢和对重平衡点的位置外,还能通过无线信号传输处理,利用钳形电流表精确捕捉平衡点位置的电流值。经测试使用,该工具系统消除了在平衡系数测量过程中捕捉电流值的人为因素影响,并解决了无机房不能准确判断平衡点问题,有效的提高了检验工作的准确性和效率。     

氧化石墨烯改性碳纤维复合材料抗冲击行为研究

使用单层纳米氧化石墨烯（NGO）粒子对环氧树脂进行改性处理，采用真空辅助树脂传递模塑成型工艺制备了[±45/0/90]_2S铺层角度下的纯树脂及单层NGO改性碳纤维复合材料（CFRP）层合板。通过落锤冲击试验、超声C扫描检测、冲击后压缩试验等对纯树脂及单层NGO改性CFRP进行实验研究。结果表明，纯树脂及单层NGO改性CFRP在损伤阻抗及损伤容限实验中均存在拐点现象，且拐点出现在相同深度位置，其中纯树脂CFRP拐点位置为0.51 mm，单层NGO改性CFRP拐点位置为0.43 mm；相对于纯树脂CFRP，单层NGO改性CFRP可以显著提高复合材料的抗冲击性能及冲击后的压缩性能；通过对冲击后凹坑深度及凹坑面积进行数据模拟，可以用拟合公式实现对复合材料的损伤预测。     

Recovery of polyphenols from camu-camu (Myrciaria dubia H.B.K. McVaugh) depulping residue by cloud point extraction

In this study the potential of cloud point extraction formed by a non-ionic surfactant was used in order to separate polyphenols from industrial residues of camu-camu. The effects of operational conditions of the cloud point extraction (CPE) on the polyphenol recovery and volumetric ratio were investigated. The results showed a maximum recovery of 95.71% that was obtained using 7.0 wt% Triton X-114, native pH (3.25), and 80 wt% polyphenol extract at 30 °C. The use of cloud point extraction was successful to recover the polyphenols from agroindustrial residue since it is a simple as well as of low-cost technique.     

Novel insights on the impact of top water on Steam‐Assisted Gravity Drainage in a point bar reservoir

As efforts are made to efficiently exploit and recover bitumen resources in Canada, increasingly more complex reservoirs in the Athabasca area continue to challenge the application of Steam‐Assisted Gravity Drainage (SAGD) technology. Several studies have been done to investigate the impact of heterogeneities/complexities such as shale barriers, lean zones, and top and bottom water on the performance of the SAGD process. However, the literature is deficient for point bar deposits with top water zones, a common occurrence in oil sands systems. This study, by using thermal reservoir simulation, examines SAGD performance in a point bar deposit reservoir where an overlying top water and an inclined heterolithic strata (IHS) is present. The results show that where the top water is unconfined and steam injection pressure is higher than that of the top water zone, there is a loss of thermal energy, but the top water does not impact steam chamber development. At steam injection pressure lower than that of the top water zone, top water continuously drains into the reservoir and constrains the size of the chamber. However, the IHS zone helps to delay drainage of the top water into the chamber when steam is injected at underbalanced conditions. Finally, under proper steam injection pressure conditions, top water production can be considerably delayed.     

Advance application of Raman spectroscopy for quantitative analysis of noncrystalline components in thin films of poly(ε-caprolactone)/poly(butadiene) blends

A quantitative analysis method for the distribution of noncrystalline poly(butadiene) component in poly(ε-caprolactone)/poly(butadiene) (PCL/PB) binary blends have been analyzed by advance application of Raman spectroscopy, optical microscopy, and differential scanning calorimetry (DSC) techniques. Thin films of different compositions of PCL/PB binary blends were prepared from solution and isothermally crystallized at a certain temperature. After calibration with real data, quantitative analyses by Raman spectroscopy revealed the amorphous PB are trapped inside the PCL crystals. Polarized optical microscopy and real time atomic force microscopy were used to collect data for the crystal morphology and crystal growth rate. For pure PCL crystals, a morphology of truncated lozenge shape was observed, independent of crystallization temperature and regardless of the blends compositions. For the pure PCL and their blends, almost unique crystal growth rate was found. The miscibility behaviors using DSC were drawn through melting point depression method. The Hoffman-Weeks extrapolations of the blends were found to be linear and identical with those of the neat PCL. The interaction parameter for the blends indicating that the PCL and PB blends have no intermolecular interaction, confirming the blends are immiscible. Despite the immiscibility of the blend, the PCL crystals do not bend during the growth process and do not reduce the growth rate as they do for miscible blend systems.     

Thermodynamic parameters of amitriptyline hydrochloride–additives at cloud point: effects of the ethanol–water mixed media

Abstract

Addition of organic solvents is known to change the properties of amphiphiles through modification of bulk phase. Amitriptyline hydrochloride (AMT) is a tricyclic amphiphilic drug which is usually used as an antidepressant. In drug delivery, the cloud point (CP) of the drug is an important parameter. This article discusses the effects of ethanol–water (EtOH–WR) compositions on the energetic parameters, such as changes in Gibbs energy of clouding (Δ_sG⁰), enthalpy of clouding (Δ_sH⁰), and entropy of clouding (TΔ_sS⁰) of AMT-additive systems. Monovalent alkali halide salts, cationic conventional surfactants, and gemini surfactants were used as additives in the EtOH–WR mixed media whose compositions were varied between 0 and 15% (w/w). The Δ_sG⁰ values are positive for all the additives and the values decrease with the rise in mole fractions of the additives. The Δ_sH⁰ and TΔ_sS⁰ were noted to be positive except for KF in 15% EtOH–WR mixed media.     

闭口闪点测定方法的对比分析

对我国常用的闭口闪点测定方法宾斯基-马丁闭口杯法、阿贝尔闭口杯法和泰格闭口杯法的测定原理进行对比分析，并采用这3种方法分别对2种有证标准样品、4种有机试剂样品和7种喷气燃料样品的闭口闪点进行测定。结果表明：这3种方法在适用范围、仪器结构、升温速率和点火操作要求等方面都有一定差异，导致采用这3种方法测定同一样品的闭口闪点结果略有差异，闪点测定结果之间的最大差值与样品闪点的高低呈正相关；与阿贝尔闭口杯法相比，宾斯基-马丁闭口杯法测得的闪点结果较高，对于3号喷气燃料，二者之差为0～1.0 ℃，阿贝尔闭口杯法更适合3号喷气燃料闭口闪点的测定；对于纯有机试剂样品，阿贝尔闭口杯法和宾斯基-马丁闭口杯法测得的闪点结果呈现较好的线性关系。     

热处理工艺对30MnCrNiMo高强钢组织与性能的影响

借助全自动淬火膨胀仪测定钢的Ac₁、Ac₃相变点,通过对试验钢进行淬火+亚温淬火+回火热处理和淬火+回火热处理,研究了两种热处理工艺下30MnCrNiMo高强钢的组织与性能。结果表明:30MnCrNiMo高强钢的Ac₁、Ac₃相变点分别为653、807 ℃。采用淬火+亚温淬火+回火的热处理工艺所获得的马氏体和铁素体复相组织比直接淬火+回火得到的全马氏体组织更为细小、均匀,试验钢的屈服强度为1499 MPa,伸长率为14.0%,室温、-40 ℃冲击吸收能量分别为35.5和29.5 J,钢的塑性和冲击性能显著提升,有效改善了30MnCrNiMo高强钢的强韧性能。     

Material-point erosion simulation of dynamic fragmentation of metals

We present a validation assessment of the eigenerosion scheme applied in conjunction with the Optimal Transportation Meshfree (OTM) method. The assessment is based on the detonation-driven 304L steel spherical-cap fragmentation experiments of Campbell et al. (2007). Metrics used for purposes of validation include the velocity history of a witness point of the shell and the histogram of recovered fragment sizes. The results of the simulations are found to be in overall good agreement with the experimental measurements, especially when allowances are made for uncertainties in the characterization of the drive and material properties. The ability of the approach to predictively simulate exceedingly complex patterns of fracture and fragmentation under severe conditions of loading and material behavior is remarkable, especially in consideration of the simplicity of the fracture model and its implementation.